Custom Home Painting Contractors for Utah County Builders

Custom homes are what we do best. We focus on finish quality for builders who want the paint to match the craftsmanship of the home.

Why builders choose Tadd Painting as their painting subcontractor

A four-generation Utah painting family

The Tadd Brothers are proud to continue a four-generation tradition in the Utah painting industry. We're a local crew run by brothers, based in the Spanish Fork and Mapleton area, and we care about doing the work right and communicating well from start to finish.

Custom homes are our focus

Custom residential work is what we do best. As painting contractors for custom home builders, we focus on finish quality on custom homes.

Licensed and insured

Tadd Painting holds Utah License #14200420-5501. We're properly insured, and a certificate of insurance (COI) and W-9 are available on request.

Two finish packages

We offer two specialty finish packages, Standard Prep and Premium Prep. Both use Sherwin-Williams Emerald Urethane & Cashmere (or comparable from other brands) and the same wall prep: flashlight inspection, dust removal before paint, 150-grit sanding, caulked corners, and 2 sprayed coats with a backrolled second coat.

On every package, we caulk the dusty corners where walls meet ceilings, where drywall tends to crack. It's a small detail, and it's the kind we look for.

Standard Prep trim gets Bondo on mitered joints and corners, puttied nail holes, and 2 coats of premium urethane trim paint.

Compare the full finish packages →

Premium Prep: a luxury-level trim finish

Premium Prep is for custom homes where the finish carpentry is a feature. It's more careful, more detailed work poured into every piece of trim, and it shows.

On every Premium Prep home, we:

  • Sand MDF trim and doors, including hollow-core doors, to remove the factory primer texture.
  • Check trim under a raked flashlight and fill imperfections with Bondo glazing putty, the kind you'd only see at an angle.
  • Prime with high-quality primers that seal the surface without adding orange-peel texture.
  • Finish with premium trim paints like Sherwin-Williams Emerald Urethane or Benjamin Moore ADVANCE. They dry slowly and level out to a very smooth, hard finish.

What you'll notice: trim that's smooth to the touch and hard-wearing, with no unfilled nail holes and no orange peel. Even budget hollow-core doors feel smoother. Quality trim paints also touch up better and last longer, so the finish carpentry stands out as a feature for years.

Where it makes the biggest difference: two- and three-tone color schemes, wainscoting and board and batten, coffered ceilings, tongue-and-groove accents, and mudroom cubbies built for heavy daily use, with a finish similar to cabinets.

Learn more about Premium Prep →

Working with your clients

Good communication with your clients matters, and it's something we do well. On jobs with builders we work with closely, we usually walk the home with the homeowner before any paint goes on the wall. We work with our paint suppliers to provide drawdown samples, so colors are approved before the job starts. And where it makes sense, we offer suggestions to help the homeowner get the look they want.

Paint systems we spec

  • Sherwin-Williams Emerald Urethane & Cashmere: listed in both finish packages. Emerald Urethane, usually semi-gloss, is our trim and door paint; Cashmere is low lustre.
  • Benjamin Moore ADVANCE: a premium trim paint used on Premium Prep finishes, as an alternative to Sherwin-Williams Emerald Urethane
  • Comparable products from other brands when the spec calls for them
  • Bondo products for trim and joint repair
  • High-quality primers that seal the surface without adding orange-peel texture (Premium Prep)

Custom home painting services for builders

Custom home interior painting

Full interiors for custom residential new construction, finished to the Standard or Premium Prep package you spec. We use the right products and proven techniques for a durable, good-looking finished product.

Exterior painting

Durable, weather-resistant exterior paint systems that protect the structure from the elements.

Staining

Decks, cabin exteriors, and interior wood. On our projects that has included handrails, stair treads, beams, banisters, and walnut-stained alder trim.

View all services →

Where painting fits in the custom home schedule

On most custom builds, painting follows a familiar sequence, though the order varies by builder.

  1. Drywall is finished. Hanging, taping, and texture are complete, and the drywall has had time to dry.
  2. Trim and doors are installed. Casing, base, and interior doors go in before final paint, so seams, miters, and nail holes can be prepped and painted with everything else.
  3. Prep. Done to the finish package you choose (see above). We do all of the caulking and putty, and we make the carpentry look premium.
  4. Stain and clear coat. On our jobs, stain usually goes on before paint. Handrails, stair treads, beams, banisters, and other interior wood are stained and clear-coated as the design calls for.
  5. Prime and paint. Walls get 2 sprayed coats, and trim and doors get a premium urethane trim paint.
  6. Other finishes, then touch-ups. Fixtures, hardware, and remaining finish trades typically follow paint. Touch-ups of our own work are included. Touch-ups after other trades are billed at a reasonable hourly rate.

Scheduling and supervision. We can usually start with a few weeks' notice. Drew and Alex are on site for most jobs and personally supervise the others, and trusted, competent lead painters are in charge at all times.

Builder FAQ

When in the build should we bring in the painter?

Painting usually starts once drywall is finished and interior trim and doors are installed. Contact us before that point so we can bid from your plans. We can usually start with a few weeks' notice.

What's the difference between Standard Prep and Premium Prep?

Both share the same wall prep and products. Premium Prep is a luxury-level trim finish: we sand MDF trim and doors, including hollow-core doors, to remove the factory primer texture; check trim under a raked flashlight and fill imperfections with Bondo glazing putty; prime with high-quality primers that seal the surface without adding orange-peel texture; and finish with premium trim paints like Sherwin-Williams Emerald Urethane or Benjamin Moore ADVANCE, which dry slowly and level out to a very smooth, hard finish. See the full comparison →

What paint do you use on trim and doors?

Sherwin-Williams Emerald Urethane, usually in semi-gloss, or comparable from other brands, including Benjamin Moore ADVANCE on Premium Prep. Both finish packages list Sherwin-Williams Emerald Urethane & Cashmere.

Do you handle staining on custom homes?

Yes. We stain decks, cabin exteriors, and interior wood. On recent homes that has included handrails, stair treads, beams, and banisters, which were sanded, stained, and clear-coated.

Recent custom home work

Spanish Fork 3 Tone (Spanish Fork, Utah)
A new 4,800 sq ft home finished in a 3-tone scheme with walnut-stained alder trim accents and Sherwin-Williams Emerald Urethane Semi-Gloss.

Spanish Fork 3 Tone project: staircase with white risers, light gray walls, and a dark wood handrail in a new home in Spanish Fork, Utah

Mapleton Home (Mapleton, Utah)
A 5,000 sq ft home with a stained banister and multiple accent walls.

Harry Potter Parade Home (Cedar City, Utah)
A parade home with innovative layouts and a broad color scheme to match its theme. Various moldings and trim, plus handrails, stair treads, and beams that were sanded, stained, and clear-coated.

Modern Timber Lakes Cabin (Timber Lakes, Utah)
One uniform color throughout, with dark doors and a fireplace wall. Painting the doors a separate color from trim and walls gives a modern two-tone look without having to mask trim.

See all projects →

Where we work in Utah County and beyond

We're based in the Spanish Fork and Mapleton area and serve Utah County and beyond, including towns across Utah, Salt Lake, Summit, Wasatch, and Weber counties: Provo, Orem, Lehi, Spanish Fork, Mapleton, Saratoga Springs, Alpine, Park City, Heber City, Midway, Salt Lake City, Draper, Ogden, and nearby communities.

See our full service area list →

Send us your plans

Building in Utah County or nearby? Send us your plans and tell us which finish package you need, and we'll put together a bid. Our bids reflect the prep and finish level you choose, not a race to the lowest number. We're familiar with Buildertrend and other platforms. Email your plans to hello@taddpainting.com, or help us get set up on your system. A COI and W-9 are available on request.

Tadd Painting · Spanish Fork & Mapleton, Utah · Utah License #14200420-5501